brush

1HH
This series is an inexpensive utility duster/cleaner.
It is an excellent replacement for throw away acid brushes that can lose fibers. Mechanical fiber clamping construction of a Zinc Plated Steel handle holds the fibers in place with no adhesives to leach out and contaminate cleaning fluid supply. Brushes available with Horse Hair (HH) or Hog Bristle (CK

DOUBLE ENDED
This series has two sizes with two end styles (tapered and flat) to fit your needs. Fibers are mechanically clamped into the handle for maximum fiber retention so that no adhesives can leach out and contaminate surfaces being cleaned. Brushes are available with Horse Hair (HH) or Hog Bristle (CK) material. Handle material for the 1005 is Stainless Steel, and the 1010 handle is Zinc Plated Steel

ANTI STATIC BRUSHES

For these items & more

The 30 Series is a small, inexpensive, three-row "scratch" or "toothbrush" style brush made of rugged and static-neutral Plywood. The 36 Series is a four-row "scratch" brush on a larger static-neutral handle. Horse Hair versions are great cleaners/dusters. Hog Bristle versions work great where a stiffer brush is needed. Both styles are available in Horse Hair (HH), Hog Bristle (CK), stiff Stainless Steel (SS) or stiff Brass (B) material

Conductive Brushes have a surface resistivity of 102 - 104 and are perfect to use when you need to
remove static buildup from the work surface. Conductive brushes will act as a conduit between the
charged surface and the path to ground. Made with fully conductive materials that are active static
eliminators, your choice becomes the style and size that best works for you. Please use these
brushes with a wrist strap or other mechanism to provide a path to ground

The 11P, 14 and 15 Series brushes are the same style Plywood
handles, with one, two or three rows of bristles, hand laced with
stainless steel wire for maximum fiber retention and long use.
The 11P has a small face width. The 14 Series has a slightly
wider Plywood handle. The 15 Series has hand laced fibers for
maximum fiber retention and durability. Versions with extra fine
Stainless Steel and Brass fill (.003" diameter) provide a very
soft cleaning brush. The 15L Series is a 15 Series with the
Plywood handle almost twice as long to reach those extra far
away locations. The 46 Series is a large scrubber brush to be
used when wide areas are cleaned. Again, the fibers are hand
laced. The 60 Series is another variation on the 15 and 15L
Series with a 60 degree angle handle to reach difficult locations.
All brushes are available in Horse Hair (HH), Hog Bristle (CK),
Stainless Steel (SS) or Brass (B) materia

These dissipative brushes have a surface resistivity of 105 - 1011, a higher resistivity than the
conductive brushes, but sufficiently conductive to preclude any static build up in the brush. These are
excellent tools to use in removing any static charge that will result in the adhesion of particles, such
as dust, to an object. Frequent use of these brushes will keep electrostatic charges from building up
on your products. Please use these brushes with a wrist strap or other mechanism to provide a path
to ground for safety